A002 Selstat 5LT x 4

£96.37

5lt – Selstat – High solids antistatic metallised polish

Category: .

Product Description

description High performance dissipative floor polish. Retains performance even at humidities as low as 11% Independently tested to IEC 61340 – 4 – 1 and BS 7506. Makes charge dissipate off a standard vinyl floor. Improves the conductivity of conductive flooring. Applies, hardens and protects like a normal floor polish. Non-slip
application For all linoleum, P.V.C., rubber, sealed cork, sealed wood, terrazzo and thermoplastic floors. N.B. Not suitable for unsealed wood, unsealed cork or laminate flooring.
directions Selstat must be applied to a clean grease free floor. Strip old polish with Selate then rinse thoroughly with clean water, allow floor to dry. Apply a thin even film of Selstat using a clean lint free mop or applicator. Apply a second coat when the first is dry (approximately 30 minutes). COVERAGE: 60 square metres per litre. Full independent test reports are available on our website. N.B. Buffing is not recommended as this will reduce the static dissipative property of the polsh.